Transmission Fluids
Filtration Products
Air Intake Systems
2-Cycle Oils
Fuel Additives
Brake Fluids
Industrial Lubes
Family Fleet
Farm & Ranch
Heavy Equipment
Oil Selection & Filter Lookup Guide

Long Lasting Service:
AMSOIL synthetic lubricants have a long service life. Non-synthetic lubes can break down from oxidation and heat. When that happens, they sludge-up, form deposits and have to be changed. AMSOIL lubricants resist breakdowns, so they stay intact and run clean. The resistance to heat and oxidation prolongs the service life of AMSOIL synthetic lubricants, significantly extending drain intervals.

Low Temperature Fluidity/High Temperature Stability:
AMSOIL synthetic lubricants resist the effects of heat and cold far better than nonsynthetic lubricants. AMSOIL synthetics will make the difference when starting an engine that's cold, and cooling an engine that's hot!

Rust and Corrosion Protection:
AMSOIL contains special additives to prevent rust and corrosion - a vital factor for equipment that sits idle or is stored for part of the year.

AMSOIL synthetic lubricants are "super-slippery." They are extremely effective in reducing friction and drag between moving parts, resulting in reduced wear, more efficient operation and better fuel economy.

Versatile For Most Applications:
In most cases, AMSOIL synthetic lubricants eliminate the need for specialty lubes. AMSOIL products meet or exceed the performance specifications of a wide variety of farm machinery.

"We have been using AMSOIL totally since 1974. We farm separately but do, on occasion, interchange some machinery. Between us we have four large 4-wheel drive John Deere tractors from 200 to 400HP. We use AMSOIL in all the tractors and the combine, and the AMSOIL By-Pass Filters, too. We change oil once a year in the early spring. We have not figured our real savings by using AMSOIL, but for sure it's a strong 50 cents on the dollar over petroleum oil, and saving a lot of labor on very little downtime. There is no way we could afford to go back to petroleum, even if it was given to us free."

Francis and Rock Ormistion, Kismet, KS

Outstanding Performance At Extreme Temperatures

AMSOIL Flows in the Cold
Non-synthetic oils thicken rapidly as the temperature drops. In cold weather, this causes difficult starting as the engine fights to turn over against the semi-solid lubricant. And even if the engine starts, the cold, thick oil will not circulate immediately, which means some parts of your engine can run for up to five minutes without any lubrication at all.

AMSOIL stays fluid at much lower temperatures. In cold weather, AMSOIL permits easier starting and instant lubrication throughout the entire engine. During starts and warm-ups, critical engine surfaces slide, protected by a tough, reliable film of oil between them.

AMSOIL Takes the Heat
A hard-working engine generates tremendous heat, a serious problem for non-synthetic lubricants. Oil thickening and oil consumption occur when high temperatures evaporate the lighter, more volatile portions of petroleum-based oil. Heat also causes oxidation, forming gummy sludges and varnishes.

AMSOIL is heat-stable! AMSOIL resists volatile evaporation and thickening at high temperatures. It resists oxidation and inhibits the formation of engine deposits.

Low volatility means reduced oil consumption. Reduced thickening promotes better fuel economy (because thick oil causes internal engine resistance) and better engine protection, especially during cold start-ups when thick oil doesn't circulate properly.

AMSOIL actually cools hot engines and gear boxes too, reducing stress on components and extending equipment life.

AMSOIL synthetic motor oils are available in quart, gallon and 2 ½-gallon containers, and 30- and 55- gallon drums.

AMSOIL Synthetic 15W-40 Heavy Duty Diesel and Marine Oil, Semi-Synthetic 15W-40 Diesel Oil and Series 3000 Synthetic 5W-30 Heavy Duty Diesel Oil are fuel efficient, super-heavy-duty, multi-viscosity lubricants for use in light and heavy-duty diesel and gasoline engines. Their synthetic base stocks and proven long-life additives assure performance, economy, and outstanding protection over extended drain intervals.

Because they meet and exceed the lubrication demands of virtually every light and heavy-duty diesel and gasoline engine, farmers with a variety of vehicles need only stock one of these "all-engine" oils for their vehicles and equipment.

Protection & Prevention:
Anti-Rust: AMSOIL 15W-40 Motor Oils contain special rust and corrosion inhibitors to protect against internal rust, an important feature for equipment stored for long periods, such as farm tractors.

Anti-Deposits: AMSOIL 15W-40 Motor Oils inhibit deposit build up. They deliver tough multi-viscosity performance to keep engines running clean at peak efficiency.

Series 3000 5W-30 Heavy Duty Diesel Oil

Fuel efficient formula for both gasoline and diesel fleets. Deliver up to 82 percent greater wear protection than other popular diesel oils. Series 3000 resists oil breakdown from heat, blow-by chemicals and oxygen up to ten times longer than conventional oils.
Product Code: HDD

(for detailed product info)

15W-40 Heavy Duty Diesel and Marine Oil

AMSOIL Synthetic Heavy Duty Diesel & Marine Motor Oil is engineered for use in a wide variety of light and heavyduty applications, including over-the-road trucks, off road construction, marine engines, farm equipment, mining, industrial (pumps & generators) and personal automotive or commercial transportation. It is excellent for use with low or high sulfur diesel fuels in standard, turbocharged or supercharged engines, including modern low emission diesels such as those equipped with EGR systems.
Product Code: AME

(for detailed product info)

Synthetic 5W-40 Premium Diesel Oil

AMSOIL Synthetic 5W-40 (DEO) is the premium choice for API CJ-4 emission quality diesel oil required by model year 2007 and newer diesel engines. It delivers extraordinary lubrication in diesel engines found in commercial, fleet and personal vehicles.
Product Code: DEO

(for detailed product info)

Synthetic 5W-40 European Engine Oil

AMSOIL Synthetic 5W-40 European Engine Oil is specially formulated for the lubrication needs of European gasoline and diesel cars and light trucks. Formulated with advanced AMSOIL polyalphaolefin (PAO) synthetic base stocks, premium additives and a broad 5W-40 viscosity rating. AMSOIL 5W-40 allows motorists to take advantage of the maximum extended drain intervals recommended by European automakers while providing second-to-none protection and performance in the most demanding operating conditions.
Product Code: AFL

(for detailed product info)

15W-40 Semi-Synthetic Diesel Oil

AMSOIL Semi-Synthetic 15W-40 Diesel Oil is a modern blend of high performance synthetic base stocks, natural base stocks, and advanced additives. It provides outstanding performance and protection over extended drain intervals in light and heavy-duty diesel engines.
Product Code: PCO

(for detailed product info)

Synthetic 10W-30/SAE 30 Heavy Duty Diesel Oil

Where these viscosity grades are specified, AMSOIL Synthetic 10W-30/SAE 30 Diesel Oil (ACD) provides outstanding performance as a straight-grade SAE 30 for older two- and four-stroke diesels and as a multi-grade SAE 10W-30 in modern four-stroke diesels as well as gasoline engines. AMSOIL ACD is ideal for use in a wide variety of light and heavy-duty applications, including agriculture, off-road construction, trucking, mining, industrial (pumps and generators) and personal automotive or commercial transportation.
Product Code: ACD

(for detailed product info)

Signature Series 0W-30 Motor Oil

AMSOIL Signature Series 0W-30 Synthetic Motor Oil is the industry benchmark in lubrication technology. Engineered with the world’s finest synthetic base oils and high performance additives, AMSOIL Signature Series 0W-30 is designed for those who demand the absolute best in motor oil performance.
Product Code: SSO

(for detailed product info)

"I started using AMSOIL in 1975, and right off I could see the difference, so I put it in everything on the farm. I use AMSOIL 10W-40 Synthetic Oil in my six tractors - three internationals and three John Deeres - and in my Massey combine. We use the AMSOIL 15W-40 in our two semis, a Mack and a Detroit engine, along with the related AMSOIL Synthetic Lubes in the transmissions and differentials. AMSOIL 75W-90 Gear Lube is in the irrigation gear heads and this has lowered the fluid temperatures considerably. We are 100% AMSOIL and plan on staying that way."

Warren Bowker, Richfield, KS

AMSOIL Synthetic Natural Gas Engine Oil is a low-ash oil for superior control of spark plug fouling, post plugging and ring-belt deposits. AMSOIL Synthetic Natural Gas Engine Oil also offers superior protection against rust and corrosion for engines subject to long periods of storage or intermittent use.

AMSOIL Synthetic Natural Gas Engine Oil offers SAE 20W viscosity performance in cold temperature startability and SAE 40 viscosity performance in high temperature operations.

AMSOIL Synthetic Natural Gas Engine Oil is formulated for extended drain interval use. Its outstanding thermal and oxidative stability allow the oil to last up to ten times the time petroleum based oils last in natural gas applications.

AMSOIL Synthetic Natural Gas Engine Oil is not recommended for use in gasoline or diesel engines converted to use natural gas or propane.

20W-40 Natural Gas Engine Oil

AMSOIL Synthetic Natural Gas Engine Oil is chemically formulated to deliver unsurpassed protection for natural gas engines.
Product Code: ANG

(for detailed product info)

Formula 4-Stroke® 10W-30/SAE 30 Synthetic Small Engine Oil

A commercial grade formulation designed for hot temperature, severe service operation of small engines where routine maintenance is often difficult or infrequent. Recommended for use wherever SAE 10W-30 or SAE 30 oil is specified in gasoline or diesel engines, transmissions, hydraulics, and chain cases requiring the listed specifications. Applications include maintenance equipment, tractors, lawn and garden equipment, generators, compactors, pumps, light towers, welders, log splitters, power washers, cement mixers and trowels, skid-steers, excavators and compressors.
Product Code: ASE

(for detailed product info)


Engine Fogging Oil

Offers superior film retention, providing long-term protection against corrosion and dry starts, extending engine life and reducing operating expenses. Its aerosol spray formulation offers easy and clean applications, while reaching more components and offering better distribution than straight motor oil.
Product Code: FOG

(for detailed product info)

AMS-Oiler ®

The AMS-Oiler™ is an oil pre-charger that puts an end to dry-engine starting. With the AMS-Oiler in place, 160 cubic centimeters of oil is injected directly on the engine bearings and other wear sensitive surfaces upon turning of the key, giving instant protection to vital engine components.
Product Code: ANG

(for detailed product info)

AMSOIL Multi-Purpose Synthetic Hydraulic/Transmission Fluid is specifically designed for outstanding performance in modern farm tractors and hydrostatic drive machinery. Whether it is used in the transmission, final drive, or in the hydraulic system, AMSOIL Hydraulic/Transmission Fluid delivers superior protection and service: better lubrication for less wear, more positive control and reliability; longer service life for cost savings (in replacement fluid and time spent away from the field); vastly superior cold and hot temperature performance for easy cold weather start-ups, faster warm-ups and overall cooler operation.

Tractor Hydraulic/Transmission Fluid

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is the modern lubricant for modern farm and industrial equipment. Engineered specifically to meet the tough applications of heavy-duty, hydraulic-powered operations. Provides exceptional lubrication to reduce wear, resist heat, protect against rust and extend fluid and equipment service life.
Product Code: ATH

(click for product details)

Saber 2-Cycle Oil, 100:1 Pre-Mix

New AMSOIL Saber Professional Synthetic 2-Cycle Oil is specifically designed for lean mix ratios in pre-mix applications. Saber Professional contains high temperature detergents for small power equipment. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios with this premium synthetic formulation.
Product Codes: ATP

(click for product details)

Synthetic Blend Bar and Chain Oil

Clings to metal surfaces better than other oils. Delivers unparalleled lubrication and protection.
Product Code: ABC

(click for product details)

Why synthetic? Because synthetic lubricants are superior to conventional petroleum lubricants. Petroleum lubricants are refined from crude oil, a natural substance pumped from the earth and containing diverse chemicals. Some of the chemicals in petroleum oil are detrimental to the lubrication process and to the lubricated components. For example, some petroleum oil chemicals invite oxidation in high temperature operations. Oxidation quickly destroys lubricant integrity.

Synthetic lubes, on the other hand, are not refined from crude oil, but constructed from pure chemicals selected for their ability to lubricate. The purity of synthetic lubricant basestocks significantly reduces lubricant oxidation, which promotes the ability of synthetics to be used in higher tempresature applications than conventional lubes may be and promotes their ability to be used for extended drain intervals. In fact, AMSOIL synthetic lubricants are specifically formulated for extended drain intervals.

The molecular uniformity of carfully selected synthetic lubes promotes superior lubrication and friction reduction, which in turn promotes superior heat control, wear control and energy efficiency. Molecular uniformity also helps synthetics maintain their protective viscosity in high temperature operations, which also promotes superior wear control.

The superior performance and protection afforded your equipment by AMSOIL synthetic lubricants adds up to increased productive time and profits for you.

Reduced Operating Costs
Greater Fuel Economy
Increased Equipment Durability
Extended Drain Intervals

PC-Series Compressor Oils

AMSOIL Synthetic PC Series oils provide long compressor life through reduced component wear, corrosion protection, water resistance and lubricant breakdown resistance. These oils reduce maintenance costs by extending drain intervals and lowering labor and used product disposal requirements.
Product Code: PCH, PCI, PCJ, PCK, PCL

(click for product details)

Anti-Wear Hydraulic Oils

Synthetic AW Series Antiwear Hydraulic Oils are shear stable, long-life lubricants based on high quality synthetic oil technology. These oils are formulated with a premium additive system that inhibits oxidation (preventing acid and viscosity increase), inhibits rust, and inhibits foam (preventing spongy hydraulics).
Product Codes: AWF, AWG, AWH, AWI, AWJ, AWK

(click for product details)

Thermally Stable Biodegradable Hydraulic Oil

AMSOIL TBI hydraulic oil is a premium lubricant designed to biodegrade to its natural state when subjected to sunlight, water and microbial activity. TBI has a very low toxicity level because the oil is formulated with ashless additives that do not contain heavy metals.
Product Code: TBI

(click for product details)


Compared to microscopic dirt particles, your engine is a Goliath, roaring with heat and energy as it converts fuel into raw horsepower. But despite all this power, your engine is extremely vulnerable to the threat of microscopic engine dirt. In fact, if unchecked, this tiny menace will dramatically erode your engine's performance and can eventually cripple it beyond repair.

AMSOIL Oil and Air Filters are the key to preventing costly repairs caused by engine dirt. Filtration is simply a method of removing contaminants by trapping and holding them outside the system of oil circulation. In order for filtration to be truly effective, however, it must be able to capture contaminants of all types and sizes.

AMSOIL has developed a complete line of sophistciated filtration products designed to offer the best protection available against virtually all harmful engine contaminants.

AMSOIL Ea Air Filters

The introduction of AMSOIL Ea Air Filters represents a major breakthrough in filtration technology. For the first time, revolutionary nanofiber technology is available to the auto/light truck market. Extensive testing proves that AMSOIL Ea Air Filters are more efficient than cellulose and wet gauze air filters..
Product Code: EAA

(click for product details)

AMSOIL Ea Air Induction Filters

AMSOIL's new line of universal air induction filters are designed to replace stock oil wetted gauze or foam conical filters typically supplied by K&N, Injen, Green, AIRAID, AFE, TrueFlow and more. AMSOIL Ea Air Induction Filters offer superior efficiency, excellent airflow and are cleanable.
Product Code: EAAU

(click for product details)

Donaldson Endurance™ Air Filters

Donaldson Endurance™ Air Filters with exclusive nanofiber technology offer longer engine life, longer filter life, initial efficiency up to 99.99 percent and five times more capacity.
Product Code: EAF

(click for product details)

PowerCore Air Filters

Premium filters for Ford 6.0L Diesel PowerStroke™ engine and the GM H2 Hummer 6.0L Vortec™. The rugged structure of PowerCore® filters features an innovative, layered, fluted filter media which allows air to enter an open flute while forcing it out an adjacent flute, allowing only clean air into the engine.
Product Code: PCF-60, PCF-H2

(click for product details)

AMSOIL Ea Oil Filters

Continuing on the path to revolutionize the filtration market, AMSOIL is introducing the new Ea Oil Filter line. Ea Oil Filters feature advanced full synthetic nanofiber technology, making them the highest efficiency filters that are available for the auto/light truck market.
Product Code: EAO

(click for product details)

Donaldson Endurance™ Oil Filters

Donaldson Endurance lube filters are made using exclusive advanced synthetic media technologies. Synthetic media technology delivers cost saving benefits with extended service life, greater engine protection to prolong engine and equipment life, improved lubricant flow, improved cold start performance and reduced operating costs.
Product Code: ELF

(click for product details)

Donaldson P-Series Filters

AMSOIL is now introducing the P-Series of Donaldson filters to complement the Endurance line. The expanded offering of filtration products features many applications that differ from, and several that coincide with the Endurance line. Donaldson P-Series filters offer premium filtration at a competitive price.

(click for product details)

Donaldson TopSpin™ Filters

Donaldson TopSpin™ pre-cleaner air filters extend primary air filter life, boost system efficiency and extend engine life in all off-road heavy-duty applications, such as farm equipment, backhoes, dozers and more.

(click for product details)

Ea Spin-On By-Pass Filters

AMSOIL Ea Spin-On By-Pass Filters offer the ultimate in filtration technology. Engine wear is caused by dirt particles larger than 5 microns. The AMSOIL Ea By-Pass Oil Filter removes particles less than 1 micron, virtually eliminating engine wear. AMSOIL Ea By-Pass Oil Filters filter all the oil in a six-quart system in about five minutes at an average engine speed equivalent to 45 mph..
Product Code: BMK-11

(click for product details)

Heavy-Duty By-Pass Filtration System

For heavy-duty by-pass applications. Featuring the same synthetic nanofiber media as the rest of the Ea By-Pass Filter family. Filter and hose not included with the BMK30 kit. The EaBP120 Filter and hose (BP250) must be purchased separately.
Product Code: BMK-30

(click for product details)

Dual-Gard Ea By-Pass Oil Filtration System

The Amsoil Ea Dual Gard By-Pass Oil Filtration System treats oil to ultrafine filtration, which increases engine and oil life and enhances engine performance. By-Pass Filter elements also remove water. Water removal inhibits the formation of acids, rust and sludge.
Product Code: BMK-12

(click for product details)

AMSOIL Ea Dual Remote Oil Filtration System

The AMSOILEa By-Pass Oil Filter provides the best possible filtration protection against wear, oil degradation, rust and corrosion. Working in conjunction with the engine’s full-flow oil filter, the AMSOIL Ea By-Pass Filter operates by filtering oil on a "partial-flow" basis. It draws approximately ten percent of the oil at any one time and traps the extremely small, wear-causing contaminants and water that full-flow filters can’t remove. The AMSOILEa By-Pass Filter typically filters all the oil in the system several times an hour, so the engine continuously receives analytically clean oil.
Product Code: BMK-13

(click for product details)

Farmers need to cut costs wherever and whenever they can. AMSOIL Synthetic Gear Lubes save money by making drive trains operate as efficiently as possible, for as long as possible.

Deliver Protection Thermal Stability and Fuel Economy with Amsoil

AMSOIL's Synthetic Gear Lubes
Farming equipment drive trains generate high temperatures and pressures, which can cause significant gear wear. Conventional petroleum gear lubes can't match the superior lubrication of the AMSOIL line of synthetic gear lubes.

SEVERE GEAR ™ Synthetic Extreme Pressure Gear Lubes (75W-90, 75W-100 & 75W-140)
Specially formulated for severe duty applications, AMSOIL SEVERE GEAR ™ Synthetic Extreme Pressure Gear Lubes are excellent for vehicles that experience towing, hauling, steep hill driving, commercial use, off-road use, rapid acceleration, stop and go driving and high ambient temperatures. AMSOIL SEVERE GEAR ™ Gear Lubes are formulated with increased levels of premium quality additives, allowing improved limited-slip and locking differential performance.

And with high viscosity indices, SEVERE GEAR ™ Gear Lubes provide an extra level of protection at high temperatures. Extra additives provide additional insurance against wear in case of a lubricant film breach. These additives provide an iron sulfide barrier coating that effectively prevents micro-welding that leads to heat and friction. This allows AMSOIL SEVERE GEAR ™ Gear Lubes to prevent thermal runaway, a phenomenon caused by a lubricant 's inability to control friction and increased heat under high-stress conditions. By preventing thermal runaway, AMSOIL SEVERE GEAR ™ Gear Lubes inhibit component damage and rapid lubricant degradation.

SEVERE GEAR ™ Synthetic 75W--90 Gear Lube (SVG) replaces Series 2000 Synthetic 75W-90 Gear Lube (TGR).

SEVERE GEAR ™ Synthetic 75W--140 Gear Lube (SVO) replaces Series 2000 Synthetic 75W-140 Gear Lube (TGO).

Long Life Synthetic Gear Lubes (75W-90 & 80W-140)
AMSOIL Long Life Synthetic Gear Lubes are formulated with new and enhanced additives designed specifically for extended drain intervals of up to 500,000 miles in over-the-road trucks. Long Life Synthetic Gear Lubes are engineered to protect gears better than conventional gear oils, resisting acid, carbon and varnish formation and oxidative breakdown. Their superior shear stability allow them to maintain their viscosity during extended service. The enhanced 80W-140 formulation replaces the former 85W-140 formulation, allowing a greater operating range and improved cold temperature performance. AMSOIL Long Life Synthetic Gear Lubes are available in five gallon buckets, excellent for use with lube dispensing pumps.

Long Life Synthetic 75W-90 Gear Lube (FGR) replaces Synthetic 75W-90 Gear Lube (AGR). Long Life Synthetic 80W-140 Gear Lube (FGO) replaces Synthetic 85W-140 Gear Lube (AGO).

SEVERE GEAR™ Synthetic Extreme Pressure 75W-90 Lubricant

AMSOIL Severe Gear Synthetic Extreme Pressure (EP) Lubricants are premium grade lubricants specifically engineered for maximum performance in severe duty applications. These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives.
Product Code: SVG

(click for product details)

SEVERE GEAR™ Synthetic Extreme Pressure 75W-110 Lubricant

Severe Gear Synthetic Gear LubeAMSOIL SEVERE GEAR™ Synthetic Extreme Pressure (EP) Lubricants are premium grade lubricants specifically engineered for maximum performance in severe duty applications. These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives.
Product Code: SVT

(click for product details)

SEVERE GEAR™ Synthetic Extreme Pressure 75W-140 Lubricant

AMSOIL SEVERE GEAR™ provides performance beyond that possible with conventional gear oil. These AMSOIL custom products offer superior gear and bearing protection, better friction and heat reduction, increased efficiency and extended service life.
Product Code: SVO

(click for product details)

SAE 75W-90 Long Life Gear Lube

SAE Long Life Gear LubeAMSOIL Long Life Synthetic Gear Lubes are extended drain gear lubes engineered for 500,000-Mile Service Life in Over-The-Road Trucks. The superior cold temperature fluidity and high temperature stability properties of AMSOIL Long Life Synthetic Gear Lubes make them excellent for all-season use. Equipment lasts longer and maintenance costs are reduced with AMSOIL Long Life Synthetic Gear Lubes.
Product Code: FGR

(click for product details)

SAE 80W-140 Long Life Gear Lube

SAE Long Life Gear LubeAMSOIL Long Life Synthetic Gear Lubes are extended drain gear lubes engineered for 500,000-Mile Service Life in Over-The-Road Trucks. The superior cold temperature fluidity and high temperature stability properties of AMSOIL Long Life Synthetic Gear Lubes make them excellent for all-season use. Equipment lasts longer and maintenance costs are reduced with AMSOIL Long Life Synthetic Gear Lubes.
Product Code: FGO

(click for product details)

SAE 80W-90 Gear Lube

SAE 80W90 Gear LubeProvides the long-lasting protection, fuel efficiency and dependability needed for top performance, even in extreme-pressure conditions. Stay fluid in cold temperatures for easy cold-weather shifting. Excellent for use in passenger cars and trucks requiring a GL-5 gear lube, including those with limited slip differentials.
Product Code: AGL

(click for product details)

Slip-Lock Differential Additive

Slip Lock Differential AdditiveAMSOIL Slip-Lock Differential Additive is formulated with advanced friction modifiers and is designed to eliminate gear-housing chatter in cars, trucks and SUVs equipped with limited-slip, positraction and locking differentials. It also reduces the banging and clunking associated with automatic locking differentials.
Product Code: ADA

(click for product details)


AMSOIL Synthetic Greases are recommended for all types of farm applications. The Multi-Purpose, Heavy-Duty and Water Resistant Greases each provide outstanding antiwear protection by significantly reducing friction and wear. Each is highly resistant to water washout and each imparts excellent rust and corrosion resistance.

AMSOIL Multi-Purpose Grease is excellent for high-temperature, highspeed or general applications. AMSOIL Heavy-Duty Grease is especially designed for low-speed and high-load applications, where bearings, suspension points and other precision clearances are subject to extreme pressure. AMSOIL Water Resistant Grease is ideal for applications where exceptional resistance to water washout is a must.

Each is compatible with seals and designed to provide long-lasting performance and protection for your farm and other equipment.

Multi-Purpose Grease

Reduces friction and wear in high-speed/high-temperature components such as automotive wheel bearings and electric motors. It keeps components running clean and trouble-free for outstanding performance and long life.
Product Codes: GLA, GLB, GLC

(click for product details)

Multi-Purpose Spray Grease

Reduces friction and wear in high-speed/high-temperature components such as automotive wheel bearings and electric motors. It keeps components running clean and trouble-free for outstanding performance and long life.
Product Codes: GLA, GLB, GLC

(click for product details)

Heavy Duty Grease

Extreme-pressure, moly-fortified. Provides outstanding protection for four wheel drive steering knuckles, spring shackles and other components operating in high-load, low-speed conditions.
Product Code: GHB, GHD

(click for product details)

Fifth Wheel and Open Gear Compound

AMSOIL Fifth Wheel and Open Gear Compound is based on proprietary technology that does not use asphaltic materials, residual compounded oils or diluent solvents as part of the lubricant formulation. It provides excellent adhesion to surfaces, resistance to water washout and protection against rust, corrosion, and wear. It is an aerosol spray product, making application quick, easy, neat and economical.
Product Code: GFW

(click for product details)

Water Resistant Grease

Resists water washout and degradation. Unparalleled protection for boat trailer wheel bearings and other components frequently exposed to water.
Product Code: GWR

(click for product details)

X-treme Food Grade Grease

AMSOIL X-Treme Synthetic Food Grade Grease is an ultra-premium aluminum complex grease designed for food service and pharmaceutical industry equipment where there is a possibility of incidental contact.
Product Code: GXC

(click for product details)

Lithium Complex High Viscosity Grease

Excellent for use in heavy duty industrial and off road applications where equipment is working under adverse conditions such as exposure to environmental elements, slow, heavily-loaded applications and shock-loading conditions.
Product Code: GVC

(click for product details)

AMSOIL Semi-Fluid 00 Synthetic EP Grease

A problem-solving lubricant ideal for leaky gear boxes in industrial and fleet applications and for use in applications that are difficult to service. It is primarily used in grease-filled cases where conventional semifluid greases do not provide adequate lubricant life or protection.
Product Code: GSF

(click for product details)

Synthetic Blend Bar and Chain Oil

Clings to metal surfaces better than other oils. Delivers unparalleled lubrication and protection.
Product Code: ABC

(click for product details)


Diesel Fuel Additive Concentrate

All-season performance. Lowers diesel fuel gel point by 20° to 35° F, depending on mix ratio. Improves the performance, fuel efficiency and longevity of diesel engines while reducing deposits, black smoke, emissions and injector wear. For use in heavy-duty diesel engines. Treats up to 100 gallons.
Product Code: ADC

(click for product details)

Cold Flow Improver

AMSOIL Cold Flow Improver (ACF) has been reformulated to provide maximum cold flow capabilities in diesel fuels. The new formulation provides superior performance over the former DFF formulation
Product Code: ACF

(click for product details)

Diesel Concentrate with Cold Flow Improver

AMSOIL Diesel Concentrate Plus Cold Flow Improver (DFC) combines the superior detergency of AMSOIL Diesel Concentrate (ADF) and the excellent anti-gelling properties of AMSOIL Cold Flow Improver (ACF) in one convenient package, without sacrificing performance. AMSOIL Diesel Concentrate Plus Cold Flow Improver is formulated with excellent detergency properties to help keep injectors, rings, piston crowns and the fuel pump lubricated.
Product Code: DFC

(click for product details)

Diesel Recovery Emergency Fuel Treatment

AMSOIL Diesel Recovery quickly dissolves gelled fuel, thaws frozen fuel filters and reduces the need for a new filter, saving both money and an inconvenient trip to a parts store. Performs well in all diesel fuels, including ULSD, off-road and biodiesel. Cheap insurance against frozen fuel.
Product Code: DRC

(click for product details)

Cetane Boost Diesel Fuel Additive (all diesel engines)

Improves combustion efficiency to increase power in diesel engines. Raises cetane three to seven numbers. Also improves low-temperature starting, fuel ignition quality and reliability. Treats up to 200 gallons.
Product Code: ACB

(click for product details)

Diesel Fuel Modifier
(light-duty diesel engines)

Improves combustion, fuel efficiency, cold-weather starting, power and performance. Cleans injectors, fuel screens, pumps and filters. For use in diesel-powered cars and light-duty trucks. Treats up to 40 gallons.
Product Code: ADM

(click for product details)

Gasoline Stabilizer
(Suitable for gasoline or diesel fuel)

AMSOIL Gasoline Stabilizer keeps fuel from deteriorating during storage. Reduces the oxidation process and prevents varnish and gum build-up in gasoline. These contaminates can clog injectors, stick floats and cause poor engine startup. Allows easier start-ups.
Product Code: AST

(click for product details)


Series 500 High-Performance DOT 3 Brake Fluid

AMSOIL now offers Series 500 High-Performance DOT 3 Brake Fluid. AMSOIL Brake Fluids provide superior high-temperature performance in auto/light truck, high-performance, racing and powersports applications.
Product Code: BF3

(click for product details)

Series 600 DOT 4 Racing Brake Fluid

AMSOIL now offers Series 600 DOT 4 Racing Brake Fluid. AMSOIL Brake Fluids provide superior high-temperature performance in auto/light truck, high-performance, racing and powersports applications.
Product Code: BF4

(click for product details)

Engine Flush

AMSOIL Fast Acting Engine Flush is made from a carefully selected blend of solvents and special cleaning agents that dissolve and disperse harmful deposits formed in the crankcase, cylinder walls, pistons and rings of an internal combustion engine. When used as directed, it cleans and restores operating efficiency to valves, valve lifters, rocker arms, and pistons for improved horsepower, fuel economy, and performance.
Product Code: AEF

(click for product details)

Propylene Glycol Antifreeze and Engine Coolant

Propylene Glycol Antifreeze and Engine CoolantAMSOIL Antifreeze & Coolant is newly formulated to provide benefits far beyond those found in today's conventional antifreeze and coolant products. This revolutionary formulation provides maximum antifreeze and cooling protection in the most extreme temperatures and operating conditions.
Product Code: ANT

(click for product details)

Oil Analysis

Right now, the oil working in your crankcase, gearbox, or sump contains information that could be vital to the performance and productivity of your engine or equipment. Contaminants that can indicate wear or cause serious equipment damage such as metals, water, raw fuel, acids, fuel soot and other solids collect in your lubricant. Using oil analysis to evaluate these contaminants is a scientific approach to predictive maintenance, allowing you a look inside your machinery to spot mechanical wear and contamination in its early stages. You'll extend machine life, head off major maintenance costs and prevent catastrophic failure that can shut down or leave you stranded, and you'll maximize lubricant life.

(click for product details)

Miracle Wash Waterless Wash & Polish

Simply apply Miracle Wash using the aerosol spray can, work around with a towel and let the surface dry to a haze. Buff with a clean towel until the haze is removed and wipe away to leave your car, truck, boat, R/V or motorcycle with a fantastic shine and a super tough protective finish.
Product Code: AMW

(click for product details)


Mothers® - Polishes, Waxes and Cleaners

AMSOIL INC., The First in Synthetics®, is expanding its product line and introducing the addition of Mothers® Car Care Appearance Products. The Mothers line of products is divided up into four primary categories with additional supplemental products offered as well. The Mothers® Polishes-Waxes-Cleaners was founded in 1971 as a family owned and operated business. Over the years, Mothers® has improved its core technology in correlation with changes in paint technologies and has always offered premium car care products that span most all markets. The people at Mothers® firmly believe that the time people spend cleaning their vehicles is an investment in the health and beauty of those vehicles and, because of this philosophy, they have dedicated decades to perfecting their science and bringing consumers the highest quality products. There is no shine like Mothers®.

(click for product details)

NGK Iridium IX Spark Plugs

NGK Iridium IX spark plugs provide unsurpassed performance in auto/light truck and powersports applications. The iridium alloy electrode is extremely durable to heat, corrosion and electrical wear. The fine wire electrode reduces the amount of energy required to create a spark while providing increased ignition efficiency and superior ignitability.

(click for product details)

NGK V-Power Spark Plugs

NGK V-Power spark plugs offer higher performance in auto/light truck applications than the standard plug. The V-Power electrode lowers ignition system voltage requirements and provides better protection against fouling, greater ignitability and improved performance over conventional spark plugs.

(click for product details)

NGK Standard Spark Plugs

NGK Standard spark plugs provide excellent service for many applications, including auto/light truck, powersports and small engines. They feature a triple gasket sealing process that virtually eliminates gas leakage past the shell.

(click for product details)

NGK Commercial Spark Plugs

NGK Commercial series spark plugs are specifically designed for commercial and other small engine applications, including lawn equipment, trimmers, pumps and generators.

(click for product details)

NGK Spark Plug Wire Sets

NGK spark plug wire sets are manufactured with the finest materials and quality construction for excellent noise supprsion and superior conductivity. They offer exact OEM fit, form and function and the quality of their construction is unsurpassed.

(click for product details)

NGK Power Cable Wire Sets

NGK Power Cables are performance spark plug wires designed with ultra-low resistance for high-performance applications. They are a perfect complement to the Iridium IX spark plugs.

(click for product details)

© 2009 by AMSOIL Direct Jobber - spOIL your car

No portion of this site may be used or duplicated without the express permission of AMSOIL Direct Jobber - spOIL your car
Designed and administered by JB Design